Cheetah Print Full Coverage Decal

Decal is made from high quality permanent vinyl that is weatherproof and scratch resistant. Decals can be removed. Cannot be reused once removed.

Installation instructions:

1. Clean surface and let it dry completely. DO NOT use glass cleaner.
2. Press firmly on decal to ensure the transfer tape has a solid hold on your decal.
3. Keep your decal on the backing sheet. Hold the decal up to where you want to install it. Lightly mark the areas you want to trim using a pencil or marker. 
4. Trim away excess areas slowly. 
5. Place the trimmed decal exactly where you want it on the surface.

Hinge method

6. Place a strip of tape across middle of decal 
7. Peel one half of your decal from backing sheet and cut away backing sheet.
8. Slowly apply your decal to surface using slow uniform motion to prevent bubbles.
9. Remove tape and apply other half of decal to surface.
10. Slowly peel away transfer tape from decal at a 45 degree angle. Trim away any excess pieces of vinyl.


FAQ:

Are your decals waterproof? Yes. Every decal that we produce is made for outdoor use, resistant to sun, rain and yes, car washes.

Will this damage my paint or glass? No. Our decals are safe for paint and glass when applied and removed properly.

Can I reuse or reposition the decal? No. Decals are intended for single use, once applied they can only be removed but not reused. 

How long will my decal last? Our decals can last up to 7 years outdoors with proper care.

How do I remove my decal? To remove, apply heat using a blow dryer or heat gun. Once heat is applied use a credit card or squeegee to lift the edge of the decal, then you can peel or scrape the decal off the surface. You can then use an adhesive remover, rubbing alcohol or glass cleaner to remove any residue that may have been left behind.